banner

ABB

Home

ABB

  • 1SDA053954R1 ABB Controller module
    ABB 1SDA053954R1 T2S SACE Tmax 3P 50A 480V Breaker W/Bolts (CHIP)
    Read More
  • 3BSM000249-1 ABB Processor module
    When commissioning is completed you can use the form in Appendix H, where actual commissioning data and settings can be filled in and saved for future use.
    Read More
  • 3BSM000248-1 ABB Power module
    If you wish to discard electrical and electronic equipment (EEE), in the European Union, please contact your dealer or supplier for further information. Outside of the European Union, contact your local authorities or dealer and ask for the correct method of disposal.
    Read More
  • PFEA111-65 ABB I/O module
    The information in this document is subject to change without notice and should not be construed as a commitment by ABB AB. ABB AB assumes no responsibility for any errors that may appear in this document.
    Hot Tags : PFEA111-65 I/O module
    Read More
  • CC-U/STD ABB Controller module
    More than 120 configurations possible Configurable output signal response on input signal interruption (low fail safe / high fail safe) Adjustment and operating elements on the front-side Short-circuit proof signal outputs Plug-in connecting terminals for inputs, outputs and supply Very fast signal transmission enables use in control systems
    Hot Tags : CC-U/STD
    Read More
  • CI867K01 ABB Power module
    It uses with ABB Advant Controller 400 series, as well as other automation systems supporting Modbus TCP protocol. CI867K01 module acts as gateway between Modbus TCP protocol and automation system. It supports up to 10 simultaneous connections and handle up to 125 Modbus TCP clients.
    Hot Tags : CI867K01
    Read More
  • RTU520 ABB Controller module
    Power supply 520PSD01 RTU520 product line Application, characteristics and technical data have to be taken from the hardware data sheet: 520PSD01 data sheet 1KGT 150 823 Operation The power supply unit 520PSD01 is used to generate the necessary power for the RTU520 system. The 520PSD01 is connected directly with the 520CMD01 via connector X1 (see Figure 1and Figure 2). The RTU520 system could only be supplied via the 520CMD01 board, other boards aren’t provided. The input voltage is not galvanic isolated against the output voltages. 
    Hot Tags : RTU520
    Read More
1 ... 344 345 346
A total of346pages

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

whatsApp

contact