banner

Controller module

Home

Controller module

  • CC-U/STD ABB Controller module
    More than 120 configurations possible Configurable output signal response on input signal interruption (low fail safe / high fail safe) Adjustment and operating elements on the front-side Short-circuit proof signal outputs Plug-in connecting terminals for inputs, outputs and supply Very fast signal transmission enables use in control systems
    Read More
  • 6ES7331-7KF02-0AB0 Siemens Controller module
    SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane bus
    Read More
  • TXI2.OPEN Siemens  Controller module
    Integrates third-party systems and devices in Desigo (V4.1 or higher) The TX Open RS232/485 module integrates third-party systems via RS232 or RS485 interface to the Desigo building automation and control system. The required applications are loaded onto the module via the USB interface. 
    Hot Tags : TXI2.OPEN
    Read More
  • PNOZX3 A-B Controller module
    This document is the original document. All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made for the user's internal purposes. Suggestions and comments for improving this documentation will be gratefully received. Source code from third-party manufacturers or open source software has been used for some components. The relevant licence information is available on the Internet on the Pilz homepage
    Hot Tags : A-B PNOZX3
    Read More
  • 800T-XD2P A-B Controller module
    Rockwell Automation announces that as of December 31, 2019, the 30mm Contact Block 1-NC 800T PB will be discontinued and no longer available for sale. Customers are encouraged to remove references to the affected product(s).
    Hot Tags : 800T-XD2P
    Read More
  • RTU520 ABB Controller module
    Power supply 520PSD01 RTU520 product line Application, characteristics and technical data have to be taken from the hardware data sheet: 520PSD01 data sheet 1KGT 150 823 Operation The power supply unit 520PSD01 is used to generate the necessary power for the RTU520 system. The 520PSD01 is connected directly with the 520CMD01 via connector X1 (see Figure 1and Figure 2). The RTU520 system could only be supplied via the 520CMD01 board, other boards aren’t provided. The input voltage is not galvanic isolated against the output voltages. 
    Hot Tags : RTU520
    Read More
1 ... 35 36 37
A total of37pages

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

whatsApp

contact