HONEYWELL

Each channel's 250-Ohm load resistor is connected to the input terminal through a wire jumper on the IOTA. This jumper should be cut by the user on channels to be used with voltage transmitters. For channels 13-16 the low-side input connection is normally connected to system common by a wire jumper on the IOTA. This jumper may be cut by the user to enable differential operation subject to operating within the CMV specification.

Experion PKS Process Knowledge capabilities expand the role of distributed control, addressing all of manufacturing's critical business objectives to facilitate knowledge sharing and workflow management. The result is improved operating profit, capital cost and cash flow. Delivering a robust, scalable, plant-wide system, Experion PKS connects your operations staff with the latest automation technology as well as with each other. Built on a rock-solid foundation of process control and safety system know-how, this next-generation system provides unprecedented connectivity through all levels of process and business operations. 

Experion Series C input/output chassis-less mounted modules and field level network gateways provide the physical connection between an automation system and the process when used with the C300 Controller. Input/Output Modules and field terminations are combined in the same area. The Input/Output Modules are plugged into Input /Output Termination Assemblies to eliminate the need for a separate chassis to hold the electronics assemblies. 

The Sensepoint XCD Remote Flammable Sensor is a sensor for the detection of flammable gases, which is designed for use with the Sensepoint XCD RFD transmitter. It consists of two parts, the XCD sensor cartridge and the socket housing.