More than 120 configurations possible Configurable output signal response on input signal interruption (low fail safe / high fail safe) Adjustment and operating elements on the front-side Short-circuit proof signal outputs Plug-in connecting terminals for inputs, outputs and supply Very fast signal transmission enables use in control systems
It uses with ABB Advant Controller 400 series, as well as other automation systems supporting Modbus TCP protocol.
CI867K01 module acts as gateway between Modbus TCP protocol and automation system. It supports up to 10
simultaneous connections and handle up to 125 Modbus TCP clients.
The Siemens 6MD7160-0AD40-3AA0 is a dongle for the SICAM MCP communication module. It is used to connect SICAM RTUs, SCs, and ERTUs to non-Siemens protection relays and automation systems. The dongle supports a variety of communication protocols, including IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, DNP 3.0, and Sinaut 8-FW.
SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane bus
RS1E-X for ET200S High Feature reversing starter Setting range 0.3...3 A Mechanical switching Electronic protection AC-3, up to 1.1 kW / 400 V expandable for Brake control module 2DI module 2DI module Circuit breaker signaling parameterizable DPV 1-capable PROFIENERGY-capable to PN
The PROFIBUS terminator is an active bus terminator. The advantage of it is essentially that bus nodes can be switched off, removed or replaced without impairing data transfer. This applies particularly to the bus nodes at both ends of the bus cable at which the terminating resistors previously had to be connected and supplied. The PROFIBUS terminator can be mounted on a DIN rail.
3RK1903-0AK00 SIEMENS 65 mm terminal module for ET200S High Feature DOL starter Direct soft starter with sup.65 mm terminal module for ET200S High Feature DOL starter Direct soft starter with supply line connection.
DSS1E-X FOR ET200S HIGH FEATURE DIRECT SOFT STARTER SETTING RANGE 2.4...16A ELECTRONIC SWITCHING ELECTRONIC PROTECTION AC-3/TO 7.5KW/400V EXPANDABLE FOR BRAKE CONTROL MODULE 2DI MODULE MOTORSTARTER ES SIGNAL FROM CIRCUIT-BREAKER PARAMETERIZABLE