banner

Products

Home

Products

  • PSU-240516 HONEYWELL Power Board
    Your Safety System is protecting your process equipment and proper power supply maintenance ensures the system remains available. Each part of the system should be inspected and alarms acted upon immediately. The Safety Manager Systems Troubleshooting and Maintenance Guide section 5 and the Fail Safe Controller FSC Service Manual section 7 provide further guidance and service checklists for actions to take to maintain the system properly providing longest life and best system performance.
    Read More
  • TC-FXX102 HONEYWELL Basis unit
    This document contains Honeywell proprietary information. Information contained herein is to be used solely for the purpose submitted, and no part of this document or its contents shall be reproduced, published, or disclosed to a third party without the express permission of Honeywell International Sàrl
    Hot Tags : TC-FXX102 Input module
    Read More
  • TC-FPCXX2 HONEYWELL central processing unit
    The Honeywell TC-FPCXX2 Power Supply is a critical component for industrial automation systems, providing reliable and stable power to Programmable Logic Controllers (PLCs), Distributed Control Systems (DCS), and other industrial equipment.
    Read More
  • TC-CCR012 HONEYWELL Servo Controller
    Each channel's 250-Ohm load resistor is connected to the input terminal through a wire jumper on the IOTA. This jumper should be cut by the user on channels to be used with voltage transmitters. For channels 13-16 the low-side input connection is normally connected to system common by a wire jumper on the IOTA. This jumper may be cut by the user to enable differential operation subject to operating within the CMV specification.
    Read More
  • TC-PRS021 HONEYWELL Circuit Board
    Experion PKS Process Knowledge capabilities expand the role of distributed control, addressing all of manufacturing's critical business objectives to facilitate knowledge sharing and workflow management. The result is improved operating profit, capital cost and cash flow. Delivering a robust, scalable, plant-wide system, Experion PKS connects your operations staff with the latest automation technology as well as with each other. Built on a rock-solid foundation of process control and safety system know-how, this next-generation system provides unprecedented connectivity through all levels of process and business operations. 
    Read More
  • HONEYWELL  CC-TFB811 Gate Module
    Experion Series C input/output chassis-less mounted modules and field level network gateways provide the physical connection between an automation system and the process when used with the C300 Controller. Input/Output Modules and field terminations are combined in the same area. The Input/Output Modules are plugged into Input /Output Termination Assemblies to eliminate the need for a separate chassis to hold the electronics assemblies. 
    Read More
  • HONEYWELL SPXCDXSFXSS  Filter Modules
    The Sensepoint XCD Remote Flammable Sensor is a sensor for the detection of flammable gases, which is designed for use with the Sensepoint XCD RFD transmitter. It consists of two parts, the XCD sensor cartridge and the socket housing.
    Read More
  • 0AK810.1 B&R Input module
    The B&R 0AK810.1 is a compact, high-performance industrial PC (IPC) that is ideal for a wide range of automation applications. It features a powerful Intel Atom E6600 processor, 1 GB of DDR2 RAM, and a 40 GB solid-state drive. The 0AK810.1 also has a variety of expansion options, including two Gigabit Ethernet ports, two USB 2.0 ports, and one RS-232 port.
    Hot Tags : B&R 0AK810.1
    Read More
  • 4PP065.0571-X74 B&R Processor module
    2003 POWERLINK bus controller, 4 POWERLINK interfaces, 24 VDC, electrically isolated, order 1x terminal block TB704 separately!
    Hot Tags : 4PP065.0571-X74
    Read More
  • CC-U/STD ABB Controller module
    More than 120 configurations possible Configurable output signal response on input signal interruption (low fail safe / high fail safe) Adjustment and operating elements on the front-side Short-circuit proof signal outputs Plug-in connecting terminals for inputs, outputs and supply Very fast signal transmission enables use in control systems
    Hot Tags : ABB CC-U/STD
    Read More
  • CI867K01 ABB Power module
    It uses with ABB Advant Controller 400 series, as well as other automation systems supporting Modbus TCP protocol. CI867K01 module acts as gateway between Modbus TCP protocol and automation system. It supports up to 10 simultaneous connections and handle up to 125 Modbus TCP clients.
    Hot Tags : CI867K01
    Read More
  • 6MD7160-0AD40-3AA0 Siemens Input Module
    The Siemens 6MD7160-0AD40-3AA0 is a dongle for the SICAM MCP communication module. It is used to connect SICAM RTUs, SCs, and ERTUs to non-Siemens protection relays and automation systems. The dongle supports a variety of communication protocols, including IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, DNP 3.0, and Sinaut 8-FW.
    Read More
1 ... 871 872 873 874 875 876
A total of876pages

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

whatsApp

contact