SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane bus
RS1E-X for ET200S High Feature reversing starter Setting range 0.3...3 A Mechanical switching Electronic protection AC-3, up to 1.1 kW / 400 V expandable for Brake control module 2DI module 2DI module Circuit breaker signaling parameterizable DPV 1-capable PROFIENERGY-capable to PN
The PROFIBUS terminator is an active bus terminator. The advantage of it is essentially that bus nodes can be switched off, removed or replaced without impairing data transfer. This applies particularly to the bus nodes at both ends of the bus cable at which the terminating resistors previously had to be connected and supplied. The PROFIBUS terminator can be mounted on a DIN rail.
3RK1903-0AK00 SIEMENS 65 mm terminal module for ET200S High Feature DOL starter Direct soft starter with sup.65 mm terminal module for ET200S High Feature DOL starter Direct soft starter with supply line connection.
DSS1E-X FOR ET200S HIGH FEATURE DIRECT SOFT STARTER SETTING RANGE 2.4...16A ELECTRONIC SWITCHING ELECTRONIC PROTECTION AC-3/TO 7.5KW/400V EXPANDABLE FOR BRAKE CONTROL MODULE 2DI MODULE MOTORSTARTER ES SIGNAL FROM CIRCUIT-BREAKER PARAMETERIZABLE
Expand island bus to a distance of up to 2 x 200 meters
Compact design per DIN 43 880, requires little space
Easy installation and setup
– Mounted on standard rails
– Self-connecting bus (island bus) for the easiest possible installation
– Plug-in screw terminals for island bus expansion
– No programming / parameterization tool required
Integrates third-party systems and devices in Desigo (V4.1 or higher) The TX Open RS232/485 module integrates third-party systems via RS232 or RS485 interface to the Desigo building automation and control system. The required applications are loaded onto the module via the USB interface.