3KXG758003U0400  ABB  Processor module

The minus signal (5a) is enabled only for variables that can present negative values (active power, reactive power, power factor, demand of active power and demand of reactive power). The measurements and texts area (5b) has four 7-segment digits with decimal points, showing numeric values or texts for configuration and data reading. The magnitude area (5c) can present the “K” (kilo), “M” (Mega) or “/” (percent) according to the current measured value. The LED energy pulses (5d) according to the active energy consumption.

In order to configure the device and to change its settings, it is first necessary to enable the configuration by entering the 4-digit password. The default password is 0000; it is recommended to modify the password at the first use of the device, as explained in paragraph “5.2.17 Password modification”

The critical configuration counter counts how many times the critical parameters have been configured. Critical parameters are the ones which causes impact in the energy calculation, which are: • primary of the CT; • secondary of the CT; • primary of the VT; • secondary of the VT; • type of connection; • energy resolution. This is a tool useful to control possible undesired changes done by the user, which may impact the energy calculation.

The navigation in the data reading menu through the different visualization pages of the measured parameters is performed by pressing “Up” and “Down” . Please notice that if the Loop functionality has been used on the software M2M SW, then the following parameters order might not be guaranteed

This manual contains all of the safety information, the technical aspects and the operating necessary to ensure the correct use of the device and maintain it in safe conditions. ABB cannot be held liable for any damage or personal injury arising from incorrect or improper use of its equipment. This document is subject to changes without prior notice. This manual refers to the instrument firmware version V.1.07 or later.

The manual must be stored close to the device; safe from liquids and anything else which may compromise its leggibility. The manual and the declaration of conformity are both an integral part of the device until it is dismantled. If the manual is lost or illegible please request a copy from the manufacturer.

The copyright of this manual is the property of ABB S.p.A. This manual contains texts, designs and illustrations of a technical nature which must not be disclosed or transmitted to third parties, even partially, without the written authorization of ABB S.p.A.

M2M Basic is a digital power meter that allows the effective measurement of more than 40 electrical parameters on 3-phase and monophase networks. The power meter is suitable for panel door mounting. It is equipped with a red LED HMI easy to view and four buttons keyboard for the navigation and configuration of the meter. M2M Basic supports serial communications through the RS-485 Modbus RTU communication interface which allows to remotely configure and monitor the device through the software M2M SW.

The structure and details of the product：

Please make an inquiry for more models

　　ABB TB8073BSE008538R1

　　ABB SD8333BSC610066R1

　　ABB TK801V0123BSC950089R3

　　ABB TB8063BSE008536R1

　　ABB TB8253BSE036634R1

　　ABB TU833V13BSE038726R1

　　ABB SD8343BSC610067R1

　　ABB TB8103BSE008560R1

　　ABB TK811V0503BSC950107R2

　　ABB TB8423BSE022464R1

　　ABB TB40A3BSE037760R1

　　ABB AO845A3BSE045584R1

　　ABB AO801-eA3BSE020514R2

　　ABB DI801-eA3BSE020508R2

　　ABB DO801-eA3BSE020510R2

　　ABB DI811-eA3BSE008552R2

　　ABB AI810-eA3BSE008516R2

　　ABB AI830A-eA3BSE040662R2

　　ABB DP840-eA3BSE028926R2

　　ABB AO845A-eA3BSE045584R2

　　ABB AI835A-eA3BSE051306R2

　　ABB DO810-eA3BSE008510R2

　　ABB TB820V2-eA3BSE013208R2

　　ABB AO810V2-eA3BSE038415R2

　　ABB AI820-eA3BSE008544R2

　　ABB DI821-eA3BSE008550R2

　　ABB AO820-eA3BSE008546R2

　　ABB DO802-eA3BSE022364R2

　　ABB DI810-eA3BSE008508R2

　　ABB AI845-eA3BSE023675R2

　　ABB AI801-eA3BSE020512R2

　　ABB DI803-eA3BSE022362R2

　　ABB DI802-eA3BSE022360R2

　　ABB TB40A-eA3BSE037760R2

　　ABB TB825-eA3BSE036634R2

　　ABB PM866K023BSE050199R1

　　ABB PM861AK023BSE018160R1

　　ABB PM866K013BSE050198R1

　　ABB PM851AK013BSE066485R1

　　ABB TB8523BSC950263R1

　　ABB PM864AK023BSE018164R1

　　ABB PM856AK013BSE066490R1

　　ABB TK850V0073BSC95019R1

　　ABB SB8223BSE018172R1

　　ABB PM860AK013BSE066495R1

　　ABB TB8503BSC950193R1

　　ABB TK851V0103BSC950262R1

　　ABB TK212A3BSC630197R1

　　ABB SB8213BSE018109R1

　　ABB TB8513BSC950194R1

　　ABB MB801V5123BSE042257R1

　　ABB PM861AK01-eA3BSE018157R2

　　ABB PM861AK02-eA3BSE018160R2

　　ABB PM856AK01-eA3BSE066490R2

　　ABB PM866K01-eA3BSE050198R2

　　ABB PM851AK01-eA3BSE066485R2

　　ABB PM864AK02-eA3BSE018164R2

　　ABB PM860AK01-eA3BSE066495R2

　　ABB PM864AK01-eA3BSE018161R2

　　ABB PM866K02-eA3BSE050199R2

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels.JUSTWELL PTE. LTD., Ltd. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.

Other best-selling products：