72850-03-04-04-01-01-01-01-15 BENTLY NEVADA  Circuit Board

The cable should be routed inside conduit connected to the enclosure which contains the Proximitor. Where the cable is installed in a conduit, care must be taken not to rub or cut the cable on sharp or rough surfaces. Protect the connector from contamination by covering or taping prior to pushing through the conduit. If it is undesirable or not possible to route the cable inside conduit, armored cable should be used. Use clips or similar devices to secure the armored cable to supporting surfaces. Route the cable through protected areas to reduce the chance of physical abuse. The armor should be terminated at the Proximitor enclosure. If the connector on the cable ever needs replacement, check with Bently Nevada Corporation for installation procedures, connector part numbers, and the required tools.

The Proximitor should be mounted in an enclosure that provides protection from mechanical damage and contamination. Weatherproof sheet metal or explosion-proof cast-aluminum housings provide optimum protection from mechanical damage and undesirable climatic conditions. In corrosive or solvent environments, the enclosure should be purged with clean, dry compressed air or inert gas to protect the Proximitor. The protective enclosure should be free of material such as loose metal parts that could short-circuit Proximitor terminals. Excess cable and uninsulated armor must be secured away from Proximitor terminals. The excess cable, for example, can be secured with clamps to the enclosure lid or housing wall. Bently Nevada Corporation recommends placing as many Proximitors as possible in the same protective enclosure, provided that all can be installed without altering the electrical length of the probe-to-Proximitor cabling. Enclosing multiple Proximitors decreases installation costs and simplifies the routing of cables from the Proximitors to the monitors. Check with the nearest Bently Nevada Corporation office for information on available Proximitor housings.

The structure and details of the product：

Please make an inquiry for more models

　　BENTLY NEVADA BENTLY9200-01-05-10-00

　　BENTLY NEVADA 125388-01

　　BENTLY NEVADA 127610-01 3500/15

　　BENTLY NEVADA 128275-01

　　BENTLY NEVADA 135813-01

　　BENTLY NEVADA 136719-01

　　BENTLY NEVADA 3300/03 3300/03-01-00

　　BENTLY NEVADA 3300/05-23-00-00

　　BENTLY NEVADA 3300/16 3300/0-00-00

　　BENTLY NEVADA 3300/20 3300/20-0

　　BENTLY NEVADA 3300/35 3300/35-2

　　BENTLY NEVADA 3300/46 3300/46-46-04-02-01

　　BENTLY NEVADA 3300/50 3300/50-01-01-00-00

　　BENTLY NEVADA 3300/65 3300/65-1-00

　　BENTLY NEVADA 3300XL 8MM

　　BENTLY NEVADA 330101-00-

　　BENTLY NEVADA 330101-00-28-10-02-05

　　BENTLY NEVADA 330103-00-03-10-02-05

　　BENTLY NEVADA 330103-00-04-10-02-05

　　BENTLY NEVADA 330103-00-05-05-02-05

　　BENTLY NEVADA 330103-00-05-10-02-05

　　BENTLY NEVADA 330103-00-

　　BENTLY NEVADA 330103-00-

　　BENTLY NEVADA 330103-05-10-10-02-05

　　BENTLY NEVADA 330103-10-

　　BENTLY NEVADA 330104-00-04-10-02-05

　　BENTLY NEVADA 330104-00-06-10-11-00

　　BENTLY NEVADA 330104-00-11-10-02-05

　　BENTLY NEVADA 330104-05-

　　BENTLY NEVADA 330104-0

　　BENTLY NEVADA 330104-0

　　BENTLY NEVADA 330104-5

　　BENTLY NEVADA 330105-02-12-90-02-05

　　BENTLY NEVADA 330130-040-02-05

　　BENTLY NEVADA 330130-045-02-05

Other best-selling products：