90120-02-xx 15617-01 BENTLY NEVADA  programmable controller module

The probe radiates radio frequency energy from the probe tip coil. As a conductive material (such as a machine shaft) approaches the probe tip, eddy currents are induced into that material. The closer the conductive material comes to the probe tip, the greater the magnitude of the eddy currents. As the eddy currents increase, the power energy radiated from the probe tip is absorbed and there is a corresponding loss in power detected at the Proximitor. If the probe-to-shaft gap remains constant, the Proximitor output signal remains constant; if the gap changes, the output signal changes accordingly. The 14 Millimetre Proximity Transducer System is primarily intended for measuring the axial thrust motion of large machine rotors. Its relatively large linear measuring range may be required for thrust position measurements on large machines. Probes mounted to measure thrust position should be located within 12 inches of the thrust collar. Thrust position probes mounted at the machine end opposite the thrust collar do not provide adequate protection since they also measure differential expansion. Typically, two probes are used so that if one is damaged or fails, thrust position can continue being monitored. See Figure 1-2.

This transducer system can also be mounted to measure radial vibration. Typically, two probes are mounted 90 degrees apart along the radial axis of a shaft. This enables vibration to be analyzed at all angles along the radial plane. Radial vibration probes should be mounted within 6 inches of the bearing under surveillance. See Figure 1-3

The structure and details of the product：

Please make an inquiry for more models

　　BENTLY NEVADA BENTLY9200-01-05-10-00

　　BENTLY NEVADA 125388-01

　　BENTLY NEVADA 127610-01 3500/15

　　BENTLY NEVADA 128275-01

　　BENTLY NEVADA 135813-01

　　BENTLY NEVADA 136719-01

　　BENTLY NEVADA 3300/03 3300/03-01-00

　　BENTLY NEVADA 3300/05-23-00-00

　　BENTLY NEVADA 3300/16 3300/0-00-00

　　BENTLY NEVADA 3300/20 3300/20-0

　　BENTLY NEVADA 3300/35 3300/35-2

　　BENTLY NEVADA 3300/46 3300/46-46-04-02-01

　　BENTLY NEVADA 3300/50 3300/50-01-01-00-00

　　BENTLY NEVADA 3300/65 3300/65-1-00

　　BENTLY NEVADA 3300XL 8MM

　　BENTLY NEVADA 330101-00-

　　BENTLY NEVADA 330101-00-28-10-02-05

　　BENTLY NEVADA 330103-00-03-10-02-05

　　BENTLY NEVADA 330103-00-04-10-02-05

　　BENTLY NEVADA 330103-00-05-05-02-05

　　BENTLY NEVADA 330103-00-05-10-02-05

　　BENTLY NEVADA 330103-00-

　　BENTLY NEVADA 330103-00-

　　BENTLY NEVADA 330103-05-10-10-02-05

　　BENTLY NEVADA 330103-10-

　　BENTLY NEVADA 330104-00-04-10-02-05

　　BENTLY NEVADA 330104-00-06-10-11-00

　　BENTLY NEVADA 330104-00-11-10-02-05

　　BENTLY NEVADA 330104-05-

　　BENTLY NEVADA 330104-0

　　BENTLY NEVADA 330104-0

　　BENTLY NEVADA 330104-5

　　BENTLY NEVADA 330105-02-12-90-02-05

　　BENTLY NEVADA 330130-040-02-05

　　BENTLY NEVADA 330130-045-02-05

Other best-selling products：