9200-03-02-10-00 BENTLY NEVADA  Filter Modules

After the probe is secured in position, the probe cable must be securely fastened to prevent fatigue failure caused by oil flow, moving air, or singular stress conditions. A clip or cable holding device will work as long as it does not exert enough force on the cable to cause the FEP insulation to cold flow. Cold flow is change in dimension or distortion caused by the sustained application of force. Sometimes it is necessary to seal around the probe cable. Sealing creates a special problem, because the cable is insulated with FEP which will cold flow and cannot be subjected to high pressure exerted by some gland seals. If the pressure differential across the seal area is one atmosphere or less, a simple seal (such as duct seal putty) can be used. If the differential pressure is greater than one atmosphere, a special probe must be used. Contact your nearest Bently Nevada office for more information. Before the probe is installed, make sure its electrical length is equal to the electrical length required by the Proximitor. Before routing the cable, insert an identification label (provided by the user) under the clear FEP sleeve at the end of the cable, if desired. Secure the label by applying heat to shrink the tubing. The heat source should not exceed 300° F (149° C).

The structure and details of the product：

Please make an inquiry for more models

　　BENTLY NEVADA BENTLY9200-01-05-10-00

　　BENTLY NEVADA 125388-01

　　BENTLY NEVADA 127610-01 3500/15

　　BENTLY NEVADA 128275-01

　　BENTLY NEVADA 135813-01

　　BENTLY NEVADA 136719-01

　　BENTLY NEVADA 3300/03 3300/03-01-00

　　BENTLY NEVADA 3300/05-23-00-00

　　BENTLY NEVADA 3300/16 3300/0-00-00

　　BENTLY NEVADA 3300/20 3300/20-0

　　BENTLY NEVADA 3300/35 3300/35-2

　　BENTLY NEVADA 3300/46 3300/46-46-04-02-01

　　BENTLY NEVADA 3300/50 3300/50-01-01-00-00

　　BENTLY NEVADA 3300/65 3300/65-1-00

　　BENTLY NEVADA 3300XL 8MM

　　BENTLY NEVADA 330101-00-

　　BENTLY NEVADA 330101-00-28-10-02-05

　　BENTLY NEVADA 330103-00-03-10-02-05

　　BENTLY NEVADA 330103-00-04-10-02-05

　　BENTLY NEVADA 330103-00-05-05-02-05

　　BENTLY NEVADA 330103-00-05-10-02-05

　　BENTLY NEVADA 330103-00-

　　BENTLY NEVADA 330103-00-

　　BENTLY NEVADA 330103-05-10-10-02-05

　　BENTLY NEVADA 330103-10-

　　BENTLY NEVADA 330104-00-04-10-02-05

　　BENTLY NEVADA 330104-00-06-10-11-00

　　BENTLY NEVADA 330104-00-11-10-02-05

　　BENTLY NEVADA 330104-05-

　　BENTLY NEVADA 330104-0

　　BENTLY NEVADA 330104-0

　　BENTLY NEVADA 330104-5

　　BENTLY NEVADA 330105-02-12-90-02-05

　　BENTLY NEVADA 330130-040-02-05

　　BENTLY NEVADA 330130-045-02-05

Other best-selling products：