ACS510-01-07A2-4  ABB  Servo Controller

A Vortex or Swirl flowmeter can be installed at any point in the pipeline system. However, the following installation conditions must be considered:

• Compliance with the ambient conditions • Compliance with the recommended inlet and outlet sections

• The flow direction must correspond to that indicated by the arrow on the sensor

• Compliance with the required minimum interval for removing the transmitter and replacing the sensor

• Avoidance of mechanical vibrations of the piping (by fitting supports if necessary)

• The inside diameter of the sensor and the piping must be identical

• Avoidance of pressure oscillations in long piping systems at zero flow by fitting gates at intervals • Attenuation of alternating (pulsating) flow during piston pump or compressor conveying by using appropriate damping devices. The residual pulse must not exceed 10 %. The frequency of the conveying equipment must not be within the range of the measuring frequency of the flowmeter.

• Valves / gates should normally be arranged in the flow direction downstream of the flowmeter (typically: 3 × DN). If the medium is conveyed through piston / plunger pumps or compressors (pressures for fluids > 10 bar / 145 psi), it may be subject to hydraulic vibration in the pipeline when the valve is closed. If this does occur, the valve absolutely has to be installed in the flow direction upstream of the flowmeter. Suitable damping devices (e.g. air vessels) might need to be fitted.

• When fluids are measured, the sensor must always be filled with measuring medium and must not run dry.

• When fluids are measured and during damping, there must be no evidence of cavitation. 

The relationship between the measuring medium and the ambient temperature must be taken into consideration (see data sheet).

• At high measuring medium temperatures > 150 °C (> 302 °F), the sensor must be installed so that the transmitter or terminal box is pointing to the side or downward.

The structure and details of the product：

Please make an inquiry for more models

　　ABB TB8073BSE008538R1

　　ABB SD8333BSC610066R1

　　ABB TK801V0123BSC950089R3

　　ABB TB8063BSE008536R1

　　ABB TB8253BSE036634R1

　　ABB TU833V13BSE038726R1

　　ABB SD8343BSC610067R1

　　ABB TB8103BSE008560R1

　　ABB TK811V0503BSC950107R2

　　ABB TB8423BSE022464R1

　　ABB TB40A3BSE037760R1

　　ABB AO845A3BSE045584R1

　　ABB AO801-eA3BSE020514R2

　　ABB DI801-eA3BSE020508R2

　　ABB DO801-eA3BSE020510R2

　　ABB DI811-eA3BSE008552R2

　　ABB AI810-eA3BSE008516R2

　　ABB AI830A-eA3BSE040662R2

　　ABB DP840-eA3BSE028926R2

　　ABB AO845A-eA3BSE045584R2

　　ABB AI835A-eA3BSE051306R2

　　ABB DO810-eA3BSE008510R2

　　ABB TB820V2-eA3BSE013208R2

　　ABB AO810V2-eA3BSE038415R2

　　ABB AI820-eA3BSE008544R2

　　ABB DI821-eA3BSE008550R2

　　ABB AO820-eA3BSE008546R2

　　ABB DO802-eA3BSE022364R2

　　ABB DI810-eA3BSE008508R2

　　ABB AI845-eA3BSE023675R2

　　ABB AI801-eA3BSE020512R2

　　ABB DI803-eA3BSE022362R2

　　ABB DI802-eA3BSE022360R2

　　ABB TB40A-eA3BSE037760R2

　　ABB TB825-eA3BSE036634R2

　　ABB PM866K023BSE050199R1

　　ABB PM861AK023BSE018160R1

　　ABB PM866K013BSE050198R1

　　ABB PM851AK013BSE066485R1

　　ABB TB8523BSC950263R1

　　ABB PM864AK023BSE018164R1

　　ABB PM856AK013BSE066490R1

　　ABB TK850V0073BSC95019R1

　　ABB SB8223BSE018172R1

　　ABB PM860AK013BSE066495R1

　　ABB TB8503BSC950193R1

　　ABB TK851V0103BSC950262R1

　　ABB TK212A3BSC630197R1

　　ABB SB8213BSE018109R1

　　ABB TB8513BSC950194R1

　　ABB MB801V5123BSE042257R1

　　ABB PM861AK01-eA3BSE018157R2

　　ABB PM861AK02-eA3BSE018160R2

　　ABB PM856AK01-eA3BSE066490R2

　　ABB PM866K01-eA3BSE050198R2

　　ABB PM851AK01-eA3BSE066485R2

　　ABB PM864AK02-eA3BSE018164R2

　　ABB PM860AK01-eA3BSE066495R2

　　ABB PM864AK01-eA3BSE018161R2

　　ABB PM866K02-eA3BSE050199R2

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels.JUSTWELL PTE. LTD., Ltd. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.

Other best-selling products：