TK3-2E BENTLY NEVADA  Analog Input Module

The 14 Millimetre Proximity Transducer System is primarily intended for measuring the axial thrust motion of large machine rotors. Its relatively large linear measuring range may be required for thrust position measurements on large machines. Probes mounted to measure thrust position should be located within 12 inches of the thrust collar. Thrust position probes mounted at the machine end opposite the thrust collar do not provide adequate protection since they also measure differential expansion. Typically, two probes are used so that if one is damaged or fails, thrust position can continue being monitored. See Figure 1-2.This transducer system can also be mounted to measure radial vibration. Typically, two probes are mounted 90 degrees apart along the radial axis of a shaft. This enables vibration to be analyzed at all angles along the radial plane. Radial vibration probes should be mounted within 6 inches of the bearing under surveillance. See Figure 1-3.

All equipment should be removed from shipping containers and visually inspected to ensure there is no shipping damage. If shipping damage is apparent, file a claim with the carrier and submit a copy to Bently Nevada Corporation. Include part and serial numbers on all correspondence. If no damage is apparent and the equipment is not going to be used immediately, Bently Nevada Corporation recommends returning the equipment to the shipping container and resealing. The equipment should be stored in an environment free from potentially damaging conditions such as high temperature, excessive humidity, or a corrosive atmosphere. See Appendix B for environmental specifications. The equipment is durable; however, reasonable handling care should be exercised during installation. When cable connectors are part of the equipment, they must be properly protected from physical abuse or contamination by oil, water, or other substances by wrapping them with FEP tape or another connection protective device.

The structure and details of the product：

Please make an inquiry for more models

　　BENTLY NEVADA BENTLY9200-01-05-10-00

　　BENTLY NEVADA 125388-01

　　BENTLY NEVADA 127610-01 3500/15

　　BENTLY NEVADA 128275-01

　　BENTLY NEVADA 135813-01

　　BENTLY NEVADA 136719-01

　　BENTLY NEVADA 3300/03 3300/03-01-00

　　BENTLY NEVADA 3300/05-23-00-00

　　BENTLY NEVADA 3300/16 3300/0-00-00

　　BENTLY NEVADA 3300/20 3300/20-0

　　BENTLY NEVADA 3300/35 3300/35-2

　　BENTLY NEVADA 3300/46 3300/46-46-04-02-01

　　BENTLY NEVADA 3300/50 3300/50-01-01-00-00

　　BENTLY NEVADA 3300/65 3300/65-1-00

　　BENTLY NEVADA 3300XL 8MM

　　BENTLY NEVADA 330101-00-

　　BENTLY NEVADA 330101-00-28-10-02-05

　　BENTLY NEVADA 330103-00-03-10-02-05

　　BENTLY NEVADA 330103-00-04-10-02-05

　　BENTLY NEVADA 330103-00-05-05-02-05

　　BENTLY NEVADA 330103-00-05-10-02-05

　　BENTLY NEVADA 330103-00-

　　BENTLY NEVADA 330103-00-

　　BENTLY NEVADA 330103-05-10-10-02-05

　　BENTLY NEVADA 330103-10-

　　BENTLY NEVADA 330104-00-04-10-02-05

　　BENTLY NEVADA 330104-00-06-10-11-00

　　BENTLY NEVADA 330104-00-11-10-02-05

　　BENTLY NEVADA 330104-05-

　　BENTLY NEVADA 330104-0

　　BENTLY NEVADA 330104-0

　　BENTLY NEVADA 330104-5

　　BENTLY NEVADA 330105-02-12-90-02-05

　　BENTLY NEVADA 330130-040-02-05

　　BENTLY NEVADA 330130-045-02-05

Other best-selling products：