1336VT-B010-EON-FA2 A-B controller module
Item NO.:
1336VT-B010-EON-FA2Payment:
T/TProduct Origin:
USAColor:
NewLead Time:
IN STOCK1336VT-B010-EON-FA2 A-B controller module
Ensure Proper Cooling and Spacing: When mounting the drives in an enclosure, follow the recommended clearances or temperature guidelines. The PowerFlex 525 can be zero-stacked (side by side with no gap) up to 45 °C ambient temperature, which saves space, but if your enclosure might exceed 45 °C, it’s wise to space the drives or use the optional cooling fan kit. For high ambient or high-density installations, consider using a cabinet fan or AC unit to keep temperatures within spec – running the drive at or below its rated temperature will maximize its lifespan. Also, if mounting in a tight cabinet, maintain the 50 mm (2 inch) clearance above and below each drive as specified, so that airflow is not obstructed (Rockwell installation guidelines). Thermal derating must be applied if these guidelines aren’t met. Use Safe Torque Off in Safety Circuits: If your system requires an E-Stop or safety interlock, wire the PowerFlex 525’s Safe Torque Off (STO) inputs into your safety circuit (for example, through a safety relay or safety PLC output). This built-in feature can remove motor torque without fully powering down the drive, meaning that when the safety condition is cleared, the machine can resume operation much faster (no need to wait for the drive to reboot). Ensure that the two STO channels are both opened for safety (the drive will indicate a safety active condition), and remember that while STO prevents torque, it does not electrically isolate the drive output – maintenance personnel should still follow lock-out/tag-out procedures and remove power when working on the motor or drive. The STO function is SIL2/PLd rated, so it can help achieve compliance with safety standards without extra hardware, but always validate the safety function as part of the overall system commissioning.
The structure and details of the product：
Please make an inquiry for more models
AB 1756-LSP
AB 1756-LSP/B
AB 1756-M02AE
AB 1756-M02AS
AB 1756-M03SE
AB 1756-M08SE
AB 1756-M1
AB 1756-M16S
AB 1756-M16SE
AB 1756-N2
AB 1756-OA16
AB 1756-OA16I
AB 1756-OB16D
AB 1756-OB16E
AB 1756-OB16I
AB 1756-OB16I/A
AB 1756-OB16IEF
AB 1756-OB16IS
AB 1756-OB32
AB 1756-OB32/A
AB 1756-OB8
AB 1756-OF4
AB 1756-OF41794-ADN
AB 1756-OF6CI
AB 1756-OF6VI
AB 1756-OF8
AB 1756-OF8/A
AB 1756-OF81
AB 1756-OG16
AB 1756-OH8I
AB 1756-ON8
AB 1756-OV16E
AB 1756-OV32E
AB 1756-OW16I
AB 1756-OW16I/A
AB 1756-OX8I
AB 1756-PA72
AB 1756-PA72/B
AB 1756-PA72/C
AB 1756-PA75
AB 1756-PA75/A
AB 1756-PA75/B
AB 1756-PA75R
AB 1756-PAR2
AB 1756-PB72
AB 1756-PB75
AB 1756-PB75R
AB 1756-PBR2
AB 1756-PC75
AB 1756-PLS
AB 1756-PSCA2/A
AB 1756-RM
AB 1756-RM2
AB 1756-RM2/A
AB 1756SC-CTR8
AB 1756-SRM/B
AB 1756-TBCH
AB 1756-TBNH
AB 1756-TBS6H
Other best-selling products：
Rockwell Automation announces that as of December 31, 2025, the Kinetix 0.1-0.1m Fiber Optic Ca...
Rockwell Automation announces that as of December 31, 2019, the 30mm Contact Block 1-NC 800T PB...
A-B 1606-XLS240E Processor module 24V,10A Single Phase Input Those responsible for the application a...
This document is the original document. All rights to this documentation are reserved by Pilz GmbH &...
Representative Photo Only (actual product may vary based on configuration selections)
Power Supply, 480 W, 24V DC, No Special Function, Performance Family, Global Input Voltage This prod...
Rockwell Automation announces that as of December 31, 2025, the Kinetix Safe Off Header Connect...
Troubleshooting and Product Information for 1747-M11 Download product information, troubleshooting g...
IPv6 network supported
