1794-TBNK  A-B  Analog Input Module

General Instructions for an EMC Compliant Installation Refer to Figure B.1. Shielded Enclosure
Typical NEMA or IEC metal enclosures are adequate.
The ground connection of the shielded enclosure must be solidly connected to the PE terminal of the controller. Good conductivity must be assured – grounding must provide a low impedance path to high frequency signals.
All wiring, except input power leads, must use shielded cable.
Input power, output power and control wiring inside the enclosure must be physically separated.
Input power, output power and control wiring outside the enclosure must use separate shielded cables, or separate conduit. Cable Clamps
Use suitable EMC-tested cable clamps only.
The connection area must be 360 degrees around the shielded cable.
The cable clamps also provide strain-relief for the cable.
When using conduit, the contact point of metal entry connections must be free of paint or non-conductive surfaces and solidly connected with good conductivity to the enclosure.

Motor Cable
The cable between the controller and motor must be a 4-wire shielded cable (three phases and ground). Refer to Figure B.2 and Figure B.3.
Do not exceed the maximum motor cable length for the specific line filter module used.
Inside the shielded enclosure, shielded motor cable must be used as close to the controller’s output terminals as possible. The shield must  be solidly connected to the PE terminal of the controller.
Where the shielded motor cable exits the enclosure, an EMC-tested cable clamp, or metal conduit must be used to solidly connect the cable shield to the enclosure.
The shield on the motor side must be solidly connected to the motor housing with an EMC-tested cable clamp, or conduit, providing good conductivity from the cable shield to the motor housing.

The structure and details of the product：

Please make an inquiry for more models

　　AB 1756-LSP

　　AB 1756-LSP/B

　　AB 1756-M02AE

　　AB 1756-M02AS

　　AB 1756-M03SE

　　AB 1756-M08SE

　　AB 1756-M1

　　AB 1756-M16S

　　AB 1756-M16SE

　　AB 1756-N2

　　AB 1756-OA16

　　AB 1756-OA16I

　　AB 1756-OB16D

　　AB 1756-OB16E

　　AB 1756-OB16I

　　AB 1756-OB16I/A

　　AB 1756-OB16IEF

　　AB 1756-OB16IS

　　AB 1756-OB32

　　AB 1756-OB32/A

　　AB 1756-OB8

　　AB 1756-OF4

　　AB 1756-OF41794-ADN

　　AB 1756-OF6CI

　　AB 1756-OF6VI

　　AB 1756-OF8

　　AB 1756-OF8/A

　　AB 1756-OF81

　　AB 1756-OG16

　　AB 1756-OH8I

　　AB 1756-ON8

　　AB 1756-OV16E

　　AB 1756-OV32E

　　AB 1756-OW16I

　　AB 1756-OW16I/A

　　AB 1756-OX8I

　　AB 1756-PA72

　　AB 1756-PA72/B

　　AB 1756-PA72/C

　　AB 1756-PA75

　　AB 1756-PA75/A

　　AB 1756-PA75/B

　　AB 1756-PA75R

　　AB 1756-PAR2

　　AB 1756-PB72

　　AB 1756-PB75

　　AB 1756-PB75R

　　AB 1756-PBR2

　　AB 1756-PC75

　　AB 1756-PLS

　　AB 1756-PSCA2/A

　　AB 1756-RM

　　AB 1756-RM2

　　AB 1756-RM2/A

　　AB 1756SC-CTR8

　　AB 1756-SRM/B

　　AB 1756-TBCH

　　AB 1756-TBNH

　　AB 1756-TBS6H

Other best-selling products：