191S-ANEJ3-CC10C-KN A-B Power Board
Item NO.:
191S-ANEJ3-CC10C-KNPayment:
T/TProduct Origin:
USAColor:
NewLead Time:
IN STOCK191S-ANEJ3-CC10C-KN A-B Power Board
Important Safety Considerations In addition to the instructions throughout this document, you are also responsible for the following: • Complete a machine-level risk assessment. • Certification of the machine to the desired EN ISO 13849 performance level or EN 62061 SIL level. • Project management and proof testing in accordance with EN 61800-5-2. • The safe-motor feedback system has a maximum Mission Time of 20 years. After this time, the feedback system must be taken out of service. • The motor feedback system cannot support safety functions that are based on the absolute position without additional measures. In the case of safety functions that are based on the safe absolute position, the motor feedback system supplies only one channel without safety-related diagnostics upon powerup. You must implement a second channel by using other measures. • The motor feedback system is not able to create a safe state for the drive system independently. The drive system creates the safe state as a response to an error displayed by the motor feedback system. • To plan and use motors equipped with safety-rated feedback sensors requires technical skills that are not explained in this document.
Motor Accessories The following accessories are available for Kinetix low-inertia servo motors. Kinetix 2090 Single Motor Cables Factory-manufactured single motor cables are required with Kinetix VPL low-inertia motors. Single motor cables are designed to effectively isolate the power, and feedback or brake signals, within the cable. Single motor cables are available in configurable standard-cable lengths, and provide environmental and shield termination. Contact your nearest Rockwell Automation sales office or see the Kinetix Rotary and Linear Motion Cable Specifications Technical Data, publication KNX-TD004, for information about available Kinetix 2090 single motor cables. Shaft Seal Kits Shaft seal kits are available, as are replacement kits for field installation. A shaft seal provides a barrier that prevents moisture and particles from entering the motor bearings. Shaft seals are made of nitrile and kits include a lubricant to reduce wear.
The structure and details of the product：
Please make an inquiry for more models
AB 1756-LSP
AB 1756-LSP/B
AB 1756-M02AE
AB 1756-M02AS
AB 1756-M03SE
AB 1756-M08SE
AB 1756-M1
AB 1756-M16S
AB 1756-M16SE
AB 1756-N2
AB 1756-OA16
AB 1756-OA16I
AB 1756-OB16D
AB 1756-OB16E
AB 1756-OB16I
AB 1756-OB16I/A
AB 1756-OB16IEF
AB 1756-OB16IS
AB 1756-OB32
AB 1756-OB32/A
AB 1756-OB8
AB 1756-OF4
AB 1756-OF41794-ADN
AB 1756-OF6CI
AB 1756-OF6VI
AB 1756-OF8
AB 1756-OF8/A
AB 1756-OF81
AB 1756-OG16
AB 1756-OH8I
AB 1756-ON8
AB 1756-OV16E
AB 1756-OV32E
AB 1756-OW16I
AB 1756-OW16I/A
AB 1756-OX8I
AB 1756-PA72
AB 1756-PA72/B
AB 1756-PA72/C
AB 1756-PA75
AB 1756-PA75/A
AB 1756-PA75/B
AB 1756-PA75R
AB 1756-PAR2
AB 1756-PB72
AB 1756-PB75
AB 1756-PB75R
AB 1756-PBR2
AB 1756-PC75
AB 1756-PLS
AB 1756-PSCA2/A
AB 1756-RM
AB 1756-RM2
AB 1756-RM2/A
AB 1756SC-CTR8
AB 1756-SRM/B
AB 1756-TBCH
AB 1756-TBNH
AB 1756-TBS6H
Other best-selling products：
Rockwell Automation announces that as of December 31, 2025, the Kinetix 0.1-0.1m Fiber Optic Ca...
Rockwell Automation announces that as of December 31, 2019, the 30mm Contact Block 1-NC 800T PB...
A-B 1606-XLS240E Processor module 24V,10A Single Phase Input Those responsible for the application a...
This document is the original document. All rights to this documentation are reserved by Pilz GmbH &...
Representative Photo Only (actual product may vary based on configuration selections)
Power Supply, 480 W, 24V DC, No Special Function, Performance Family, Global Input Voltage This prod...
Rockwell Automation announces that as of December 31, 2025, the Kinetix Safe Off Header Connect...
Troubleshooting and Product Information for 1747-M11 Download product information, troubleshooting g...
IPv6 network supported
