440F-EENMM02100 A-B  Circuit Board

Control Wiring • The control logic is 24V DC and can be set for either Sink or Source control via a DIP switch setting. • Control terminal screws are sized for a conventional blade screwdriver. • I/O Terminals 1, 2, and 3 are dedicated for Stop, Start, and Reverse operation respectively. These I/O Terminals can be programmed for 2-wire or 3-wire operation to meet application requirements. • I/O Terminals 4 and 5 are programmable and provide added flexibility. Programmable functions include: - Local Control - Preset Frequencies - Jog - RS-485 Control - Second Accel/Decel - Auxiliary Fault - Clear Fault • Speed can be controlled via a 0…10V input or 4…20 mA input. Both are electrically isolated from the drive. • One form C relay can be programmed to provide the status of a wide variety of drive conditions. The drive is shipped with a jumper installed between I/O Terminals 01 and 02…11 to allow out of box operation from the keypad.

Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation® sales office or online at http://www.ab.com/manuals/gi) describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc. is prohibited.

The structure and details of the product：

Please make an inquiry for more models

　　ABB TB8073BSE008538R1

　　ABB SD8333BSC610066R1

　　ABB TK801V0123BSC950089R3

　　ABB TB8063BSE008536R1

　　ABB TB8253BSE036634R1

　　ABB TU833V13BSE038726R1

　　ABB SD8343BSC610067R1

　　ABB TB8103BSE008560R1

　　ABB TK811V0503BSC950107R2

　　ABB TB8423BSE022464R1

　　ABB TB40A3BSE037760R1

　　ABB AO845A3BSE045584R1

　　ABB AO801-eA3BSE020514R2

　　ABB DI801-eA3BSE020508R2

　　ABB DO801-eA3BSE020510R2

　　ABB DI811-eA3BSE008552R2

　　ABB AI810-eA3BSE008516R2

　　ABB AI830A-eA3BSE040662R2

　　ABB DP840-eA3BSE028926R2

　　ABB AO845A-eA3BSE045584R2

　　ABB AI835A-eA3BSE051306R2

　　ABB DO810-eA3BSE008510R2

　　ABB TB820V2-eA3BSE013208R2

　　ABB AO810V2-eA3BSE038415R2

　　ABB AI820-eA3BSE008544R2

　　ABB DI821-eA3BSE008550R2

　　ABB AO820-eA3BSE008546R2

　　ABB DO802-eA3BSE022364R2

　　ABB DI810-eA3BSE008508R2

　　ABB AI845-eA3BSE023675R2

　　ABB AI801-eA3BSE020512R2

　　ABB DI803-eA3BSE022362R2

　　ABB DI802-eA3BSE022360R2

　　ABB TB40A-eA3BSE037760R2

　　ABB TB825-eA3BSE036634R2

　　ABB PM866K023BSE050199R1

　　ABB PM861AK023BSE018160R1

　　ABB PM866K013BSE050198R1

　　ABB PM851AK013BSE066485R1

　　ABB TB8523BSC950263R1

　　ABB PM864AK023BSE018164R1

　　ABB PM856AK013BSE066490R1

　　ABB TK850V0073BSC95019R1

　　ABB SB8223BSE018172R1

　　ABB PM860AK013BSE066495R1

　　ABB TB8503BSC950193R1

　　ABB TK851V0103BSC950262R1

　　ABB TK212A3BSC630197R1

　　ABB SB8213BSE018109R1

　　ABB TB8513BSC950194R1

　　ABB MB801V5123BSE042257R1

　　ABB PM861AK01-eA3BSE018157R2

　　ABB PM861AK02-eA3BSE018160R2

　　ABB PM856AK01-eA3BSE066490R2

　　ABB PM866K01-eA3BSE050198R2

　　ABB PM851AK01-eA3BSE066485R2

　　ABB PM864AK02-eA3BSE018164R2

　　ABB PM860AK01-eA3BSE066495R2

　　ABB PM864AK01-eA3BSE018161R2

　　ABB PM866K02-eA3BSE050199R2

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. Xiamen Rongfeng Electrical Equipment Co., Ltd. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.

Other best-selling products：