442G-MABL-URM-C04 A-B Analog Output Modules
Item NO.:
442G-MABL-URM-C04Payment:
T/TProduct Origin:
USAColor:
NewLead Time:
IN STOCK442G-MABL-URM-C04 A-B Analog Output Modules
This chapter provides instructions about how to operate and configure an E100™ Electronic Overload Relay system. It includes instructions about how to set the Trip Current and Trip Class. This chapter also describes the accessory modules that are available for the Advanced (193/592-1EF) E100 relay. Before You Begin Before you configure the E100 relay, you must install it onto a contactor or DIN Rail, or mount it on a panel. See page 5 for a list of related installation instructions. You can search for and download literature at rok.auto/literature. Configure the Device Use the rotary dials on the front of the unit to select the trip class and adjust the trip current.Set the Trip Current When you set the trip current, you must consider the motor service factor and FLA. You can find this information on the motor nameplate, as shown in Table 1 and Table .This section describes how to configure the accessory modules for the Advanced version (193/ 592-1EF) of the E100 relay. You must correctly install the accessories before you configure them. See page 5 for a list of related installation instructions.
Cat. No. 193-1EGJ Universal Protection Expansion Module The Cat. No. 193-1EGJ Universal Protection module adds ground fault and jam protection to the Advanced version (193/592-1EF) of the E100 relay. The add-on module lets you select the jam current level, jam trip delay, and ground fault level.Cat. No. 193-1ERR Electronic Reset and Indication Display Module The Cat. No. 193-1ERR Electronic Reset and Indication Display Module lets you use the Cat. No. 193-ERID and 193-ERIDN Remote Indication and Display module with the Advanced version (193/ 592-1EF) of the E100 relay.
The structure and details of the product：
Please make an inquiry for more models
AB 1756-LSP
AB 1756-LSP/B
AB 1756-M02AE
AB 1756-M02AS
AB 1756-M03SE
AB 1756-M08SE
AB 1756-M1
AB 1756-M16S
AB 1756-M16SE
AB 1756-N2
AB 1756-OA16
AB 1756-OA16I
AB 1756-OB16D
AB 1756-OB16E
AB 1756-OB16I
AB 1756-OB16I/A
AB 1756-OB16IEF
AB 1756-OB16IS
AB 1756-OB32
AB 1756-OB32/A
AB 1756-OB8
AB 1756-OF4
AB 1756-OF41794-ADN
AB 1756-OF6CI
AB 1756-OF6VI
AB 1756-OF8
AB 1756-OF8/A
AB 1756-OF81
AB 1756-OG16
AB 1756-OH8I
AB 1756-ON8
AB 1756-OV16E
AB 1756-OV32E
AB 1756-OW16I
AB 1756-OW16I/A
AB 1756-OX8I
AB 1756-PA72
AB 1756-PA72/B
AB 1756-PA72/C
AB 1756-PA75
AB 1756-PA75/A
AB 1756-PA75/B
AB 1756-PA75R
AB 1756-PAR2
AB 1756-PB72
AB 1756-PB75
AB 1756-PB75R
AB 1756-PBR2
AB 1756-PC75
AB 1756-PLS
AB 1756-PSCA2/A
AB 1756-RM
AB 1756-RM2
AB 1756-RM2/A
AB 1756SC-CTR8
AB 1756-SRM/B
AB 1756-TBCH
AB 1756-TBNH
AB 1756-TBS6H
Other best-selling products：
Rockwell Automation announces that as of December 31, 2025, the Kinetix 0.1-0.1m Fiber Optic Ca...
Rockwell Automation announces that as of December 31, 2019, the 30mm Contact Block 1-NC 800T PB...
A-B 1606-XLS240E Processor module 24V,10A Single Phase Input Those responsible for the application a...
This document is the original document. All rights to this documentation are reserved by Pilz GmbH &...
Representative Photo Only (actual product may vary based on configuration selections)
Power Supply, 480 W, 24V DC, No Special Function, Performance Family, Global Input Voltage This prod...
Rockwell Automation announces that as of December 31, 2025, the Kinetix Safe Off Header Connect...
Troubleshooting and Product Information for 1747-M11 Download product information, troubleshooting g...
IPv6 network supported
